Roof Repairs & Fixes
Replacing A Damaged Or Missing Shingle
If you need to replace a damaged shingle, note that is is easier to remove a shingle that is cool. If the shingle you need to replace is not in the shade, you can cool it down with cold water. After cooling, use a metal pry bar between the shingles to separate them. The sealant should snap or pop loose. Remove the nails from the shingle you are replacing, as well as from the shingle above it (since these nails also go through the shingle you are replacing).
Replace the damaged or missing shingles with new shingles of matching color, following the manufacturer’s application instructions. Hand-seal these shingles, since the sealant may not re-seal after being broken.
For the proper shingle nailing technique, see our How-to-Video.
Replacing A Missing Hip Or Ridge Cap Shingle
When hip or ridge shingles blow off, they can leave your roof system open to water or snow infiltration. This can allow moisture to infiltrate and potentially enter your attic or rot your roof deck.
Replacing hip or ridge cap shingles requires removing any damaged pieces that may have been left over. You may have to remove or loosen any shingles in the proximity of the blown-off shingle to allow you to re-fasten a new hip or ridge cap shingle.
Always be sure to select a new hip or ridge shingle that matches your existing ones, both in color and thickness. Install the new piece, making sure it fully covers any existing ridge vent or other field shingles with the proper length fasteners. Utilize any asphalt cement as directed by the manufacturer’s application instructions.
Replacing hip or ridge shingles requires working on some of the highest parts of your roof – the hips and ridges. Always utilize proper safety equipment to prevent falls or injury when replacing hip or ridge shingles on your roof. See your Safety section for more details.
Replacing Attic Ridge Vents
Deciding on the proper vent and the amount of ventilation needed is critical. Always consult your local building code for balanced attic ventilation requirements in your area. Not following these requirements may lead to an inefficient system or even weather infiltration. Once you decide on the type of vent that is needed and how much to install, always ensure you install the vent as per written application instructions. Be careful not to cut any attic rafters or wires, and always be sure to properly fasten the vent to prevent blow-off or weather infiltration.
Replacing ridge vents requires working on some of the highest parts of your roof – the ridges. Always utilize proper safety equipment to prevent falls or injury when replacing ridge vents on your roof. See our Safety section for more details.
Roofing Is Tough
Don’t think you’re up to it? Your best option is to find a factory-certified GAF Master Elite® Contractor near you to do the job.
Diagnosing A Leak
To find a leak source, you need to know what water is likely to do. Water will always flow directly down with gravity. Obstructions, skylights, and penetrations are the most common leak sources. Start by examining chimneys, skylights, and plumbing vents. Then inspect roof-to-wall transition areas where flashing takes place of roofing, such as dormers, valleys, and eaves.
Many times owners think they have leaks when actually their roofs just do not have adequate ventilation. Look for algae stains on interior plywood, soaked insulation when it hasn’t rained, and black rings or rust around nails – the first sign that moisture is condensing in attic spaces.
Always repair leaks promptly to avoid adverse effects, including mold growth.
Not Feeling Up To It?
Turn to a GAF Master Elite® Contractor
A professional roofing contractor with a crew will diagnose the problems and fix them more quickly and efficiently. So while you can do all this yourself, your best option is always to find a GAF factory-certified Master Elite® Contractor near you.
Find A Contractor Near You
Don’t trust your biggest asset to just any contractor. Choosing a GAF Master Elite® Contractor is your assurance that you’ll be dealing with a quality, reputable, and dependable professional contractor. Factory-certified Master Elite® Contractors are state licensed, adequately insured, have a proven reputation, and are committed to ongoing professional training. It’s why they are your best choice!
LifepROOF is proud to provide Top Rated Local® roof repair services in Houston and the surrounding areas. We stand behind every roofing service we perform with a lifetime guarantee. This way, you know that you have the best products and the best team of roofing contractors working with you to upgrade and take care of your home. If you’re ready to get started with fixing up your roof, get started with a free consultation today. We’ll provide you with a free on-site inspection in order to determine the best way to tackle your roof repair needs.